Castelli Jacket Commuter Reflex Womens Fiery Red

$427
?

You automatically get Club Price when buying online. But there are extra benefits if you join Club 99.

$449.99
Buy now, pay later
SKU: OLM5HBY1 Low stock

5% Best Price Guarantee

If you find a cheaper price, we will beat it by 5%*

- Applies to any cheaper price found in New Zealand.

- When the competitor's final price inclusive of any taxes and delivery fees.

- Excludes Garmin products, other exclusions apply.

Designed for the rigors of commuting in all weather, this jacket keeps everything out while fitting over your office attire, but where it really shines, quite literally, is with the allover reflectivity that lights up at night yet is practically unnoticeable during the day.

This is the Castelli of commute jackets, made to deliver maximum function on the bike and then look great when you get to work. We wanted a jacket that provides maximum visibility during those night commutes but doesn't look ridiculous with all kinds of silver reflective bands and strips when you get to the office. We applied a nearly unnoticeable reflective print on the entire surface of the jacket. You don't really see it when you're riding in the daytime or wearing the jacket off the bike, but at night the jacket reflects a distinctive pattern to get you noticed. We didn't stop at the reflectivity. The 20,000 mm water column means no water is coming through, ever. And the 20,000 MVTR breathability means that a good amount of moisture will escape. But it's the ventilation details that make this jacket stand out: there's a gaiter at the waist that you can close to seal out the wind or leave open to let some air come in from the bottom to keep you cooler. This inner gaiter allows us to make a jacket that hangs straight at the bottom — a much cleaner and more refined look than a jacket with wrinkles from an internal elastic.


Product features

    • Castelli-exclusive 3-layer allover reflex fabric with 20,000 mm water column waterproofing and 20,000 MVTR breathability
    • Taped seams for fully waterproof construction
    • Cut to fit over normal clothes, longer in front and back for extra coverage
    • No-sew bottom hem for very clean look
    • No-sew external zipper flap
    • Inner gaiter can be closed to seal out drafts or left open for ventilation
    • Velcro wrist closure to effectively seal against gloves
    • Weight: 307gm
    • Temperature: -2°C - 15°C / 28°F - 59°F
    • Fit: Trail

Castelli Women's Clothing Sizing Chart

Please note: Castelli clothing is slightly smaller than traditional standard sizes. Please refer to the size chart below for ensure a perfect fit.

Castelli Women's Clothing Size Chart

Castelli Warranties

Castelli products are warranted against defects in materials or workmanship for 2 years from the date of purchase. For returns and warranty claims related to items purchased from a retailer, please return your Castelli product to the retailer from which you have purchased it. To ensure that your return will be handled smoothly remember to keep your proof of purchase.

To make sure your Castelli product lasts as long as possible please follow the suggestions below.

Where do I find the washing instructions ?
Washing instructions are printed on a white tag inside each piece of clothing. Following these instructions will help make sure that your gear will last as long as possible. Careful washing and maintenance will ensure the highest performance from your Castelli products and extend their useful life span.

  1. Always read the care label before washing a piece of clothing.
  2. Close all zips and Velcro fasteners and turn the garment inside out.
  3. Hand or machine wash on a lukewarm permanent press cycle (max. 30°C / 86°F)
  4. Use a small amount of liquid or powder detergent, not other products that contain fabric softeners, conditioners, stain removers or bleach as they will affect garment performance.
  5. Hang dry or dry flat. Do not tumble dry.

What should I do when my Castelli softshell jacket starts to absorb water?
Castelli softshell jackets treated with a durable water-repellant (DWR) finish, which keeps the outer fabric from becoming saturated so that the breathable barrier can do its job, may start to absorb water.

First of all, make sure the garment has been cleaned properly. Your Castelli softshell garment could be soaking up water just because it is dirty. First, try cleaning it. If it is fairly new or recently re-waterproofed, the DWR will be revitalized just from cleaning.

Once the garment has been thoroughly worn, you will need to restore the water-resistant finish.
You can rejuvenate the DWR finish by putting the garment in the dryer at low heat for about 20 minutes, or by ironing under low heat being careful not to melt the synthetic fibers of your garment.using a spray-on softshell treatment agent. Make sure to clean the garment first.
If this doesn't work, you may want to re-treat your Castelli product’s water repellency by applying a commercially available water-repellent spray-on DWR treatment by following these instructions:

  1. Make sure the garment has been cleaned properly and is dry.
  2. Lay the garment out flat and spray the entire outer shell with the water-repellent finish, holding the bottle 15 cm from the surface.
  3. Allow the water-repellent finish to soak in for 10-15 minutes.
  4. Wipe off excess water-repellent finish with a damp cloth. Check carefully to make sure no areas have been missed.

Remember, the garment will not become waterproof, but it will take longer for water to penetrate the outer fabric.

We recommend spray-on finishes (such as Nikwax SoftShell Proof™ and McNette) rather than wash-in finishes as it will effect the moisture management.

What should I do when a Nano Flex product starts loosing its water repellency?
The Castelli Nano Flex fabric repels water through both a DWR finish and thanks to millions of ultra-tiny nanofilaments that cause water droplets to bead up on the surface of the garment and run off instead of pooling on the fabric and soaking through. The Nano Flex treatment will last approximately 40-50 washes. (Of course, the garment must be washed correctly; if the detergent contains fabric softener the treatment will disappear immediately).

There are two ways to re-treat your Castelli Nano Flex garment and restore the water-resistant finish.:

  • Apply a commercially available water-repellent spray-on softshell treatment agent. (See above for spray-on water-repellent treatment instructions.)
  • If necessary to reactive the water repellency, you can also tumble dry on low heat for about 20 minutes. If unable to tumble dry, iron the dry garment on gentle setting (warm, no steam) by placing a towel or cloth between the garment and the iron. Do not iron over the heat-transfer Castelli and Nano Flex letters.

How to clean winter gloves with membrane fabrics?
Gloves with a wind membrane may be adversely affected by the usual care process for the fabric. Check the care label before proceeding, and always follow the manufacturer’s instructions.

  1. Always read the care label before washing your gloves.
  2. Close the Velcro wrist straps.
  3. Hand or machine wash on a lukewarm permanent press cycle (max. 30°C / 86°F)
  4. Use a small amount of liquid detergent, not powder detergents or any products that contain fabric softeners, conditioners, stain removers or bleach as they will affect garment performance.
  5. Do not use a fabric softener! This can destroy wicking and water-repellent treatments.
  6. Squeeze excess water from the gloves, starting at the fingertips and moving to the wrists; do not twist the gloves.
  7. Drip-dry the gloves with the fingers facing upward.

Since 1876, Castelli has been the tailor for the cycling champions. It was the innovative mindset which brought the earliest heroes to them; legends like Binda, Coppi and Bartali.

Castelli invented the first Lycra shorts used in racing, the first sublimation printed jerseys, the first use of windproof membranes, the first anatomic seatpad, the lightest jersey ever produced, and the most aerodynamic jersey ever produced.

Today, Castelli continue this innovative tradition for the cyclist seeking maximum performance.

View Castelli range

Click & Collect Available

• In-stock items usually ready in 4 hours* • Online Only items usually ready in 1-3 working days More info »

Courier Delivery Available

• $9.99 for orders $99 & under • Free for orders over $99 • Bulky shipping fees apply for bikes & bulky items based on item weight More info »

For just $5, you can join Club 99 and you’ll gain access to exclusive benefits that will ensure you make the most of your bike purchase both in store and online. The ride starts with Club 99.

Recently viewed