5% Best Price Guarantee
If you find a cheaper price, we will beat it by 5%*
- Applies to any cheaper price found in New Zealand.
- When the competitor's final price inclusive of any taxes and delivery fees.
- Excludes Garmin products, other exclusions apply.
Check available shipping methods
|Features:||Bike Style: eBikes, MTB, eMTB, Gravel|
|Frame:||Material: Zinc plated steel and plastic|
|Rim:||Recommended Diameter: 20'' - 29''|
|Tyre front:||Max Tyre Width: 2.1'' - 2.8''|
|Tyre rear:||Max Tyre Width: 2.1'' - 2.8''|
|Weight:||3.7kg / Maximum Weight: 35kg / Dimensions: 12cm x 12cm x 80.8cm|
Step 1 - Tyre and wheel size
Wheel size is the diameter of your wheel from edge to edge (A).
Tyre width is the width of the tyre on the wheel (B).
It’s the combination of these two numbers that determine which type of bike rack to choose.
Similar to car tyres, all bike tyres have markings on them. These will almost always give you the tyre width and the wheel diameter you need to match them to the correct Steadyrack cycle rack.
If you can't find the markings on your tyre you can simply use a tape measure to get measurements A and B.
Match your tyre markings or measurements to our bike rack types above, under the 'bike specs' section. Combine this with the below steps to find the best Steadyrack to suit your bike.
Step 2 - Narrow space between the downtube and wheel
For the most appropriate type of bike rack for bikes with tight tolerance between the downtube and tyre, use our Steadyrack Fender Rack.
These include bikes such as time trial bikes, aero bikes and some newer road bike designs such as Specalized S Works.
If your bike has less than 15mm or 1/2” gap it may be better suited to our Fender Rack.
Step 3 - Does your bike have fixed fenders or mudguards attached to the front forks?
Steadyrack Fender rack is the only type of vertical bike rack that you can roll your bike in and out of, if it has permanent fixed fenders or mudguards.
If your bike has fenders or mudguards, you will still need to match the tyre and wheel size to our Fender Rack specs to ensure it will fit - see step 1 above. You will also need to confirm the space between your fender arms and wheels is suitable - see step 4 below.
MTB fenders - Please note many mountain bikes with small fenders or mudguards will not require the Fender Rack - being much smaller they will not interfere with the function of our Classic Rack or Mountain Bike Rack.
Step 4 - Fender 'stay arms' with tight tolerance
Also known as fender arms, U Stays, mudguard holder or fender brace - some bikes with fenders or mudguards which fit tightly to the wheel/tyre will not fit our racks.
The Steadyrack Fender Rack works by sliding between the fender/mudguard and tyre when rolling the bike onto the rack. Before you purchase, take a moment to make sure your bike will fit safely and securely.
If the stays on your bike are very close to the tyre or rigid with no flexibility, there may not be room to fit the rack arms in between and you will not be able to mount the bike into this type of bike rack.
We recommend a minimum 20mm or 1/2” clearance between the tyre and stays to enable the bike rack to flex and fit between.